Description
For bolster seats from Cobalt from approximately years 2005 – 2017. These are for the single width seats with the grab bar and map pocket on the back only. If the plastic seat pan molding is cracked and the bolster hinges no longer have support, this repair kit can save you hundreds of dollars!
The repair plate is constructed out of 6061 Aluminum and CNC machined and the mounting plugs are stainless steel and polyethylene.
Easily DIY installed – no need for the dealer or an upholstery shop as long as the vinyl is still intact. All required hardware is included.
This kit is all that is needed if the only the top of the molded seat pan is broken – that is, where the bolster hinges attach. If the bottom of the seat pan is also broken and unstable, then you want the “Upper and Lower Plate Kit”.
Fletcher Ford –
Well worth the price. fixed my 08 232 seat. I weigh about 280 lbs. I know, big boy. Easy to install and seat is better than new.
Mike Careathers (verified owner) –
I bough this kit to repair the drivers side seat on my 2007 Cobalt 232. It worked great! I would highly recommend it!
Harvey Green (verified owner) –
Bought the kit for my 2014 242. It was really well made, and the plate was thicker than I expected. The holes are threaded so you don’t rely on the original plastic for the flip up bolster at all. Very pleased with the results! Installed quickly.
On a separate note., the original outside screws on the flip up were almost impossible to remove. They had been installed when new with some glue still wet from the upholstery. One screw I had to drill and use an extractor to remove.